Click image to view full size image
PARTS
● RECOMMENDED（MAX）：1500gpc
● RECOMMENDED LENGTH (Stamping parts) ：280mm
● RECOMMENDED SIZE (Fasteners) ：M4-M20 mm
PERFORMANCE (based on M10)
● HEATING CAPACITY ：400000Kcal/h
● POWER ：28kw
● MAX CURING TEMPERATURE ：350℃
● TEMPERATURE UNIFORMITY CONTROL ：±5℃
● COOLING CAPACITY ：5℃ OVER ROOM base
● AVG. TEMPERATURE OF OUTER PANEL ：5℃ OVER ROOM base
● AVG. HEATING UP TIME :40min
● MAX LOAD CAPACITY / MESH-BELT : 200kgm2
● AVG.GAS CONSUMPTION :20m3h
● MAX OUTPUT :8000kgh
● BELT CONVEY SPEED :0.23～0.52m/min
Used for fasteners zinc flake coating sintering.
Parameters
| No | Structure | Items | Parameter参数 |
| 1 | FURNACE BINDING | OUTSIDE DIMENSION L * W * H | 23000*1590*1660mm |
| 2 | INSIDE DIMENSION L * W * H | 14000*1200*300mm | |
| 3 | DRY/CURING LENGTH | 3500mm 10500mm | |
| 4 | LOADING /COLLING | 3000mm 6000mm | |
| 5 | BELT LOAD / UNLOAD CLEARANCE | 900 / 1200mm | |
| 10 | OPTION | ELECTRICAL HEATING | CHOOSE |
| 11 | AIR SUPPLY BELOW THE MESH-BELT | CHOOSE | |
| 12 | PNEUMATIC BELT TENSIONER | CHOOSE | |
| 13 | WASTE HEAT UTILIZATION | CHOOSE | |
| 14 | ELECTRICAL + GAS HEATING | CHOOSE | |
| 15 | ELECTRIC FURNACE DOOR | CHOOSE | |
| 16 | MESH-BELT BRUSHER | CHOOSE | |
| 17 | PAPERLESS TEMERATURE RECORDER | CHOOSE | |
| 18 | UNLOADING UNIT | CHOOSE | |
| 19 | AUTO RE-COATING LOOP BACK COVEYOR | CHOOSE | |
| 20 | DOUBLEDECK FEEDING DISTRIBUTOR | CHOOSE |
Single Combustion Machine FG 1412
